BC78/P1272 Tapped Channel Beam Clamp - Mini
p1272

P1272 Tapped Channel Beam Clamps Mini

£0.01

P1272 Tapped Channel Beam Clamps Mini

P1272 Tapped Channel Beam Clamps Mini c/w M10 x 40 Cone Point Screws*.

Channel Beam Clamps can temporarily or permanently attach utility conduits, pipework, flooring, or roofing materials to the flanges of I-beams.  They can also create joints between beams.  The clamp action is typically either spring steel or screw-set.  The clamps can support both horizontal or vertical loads.

 

  • Dimensions: 50mm x 30mm
  • Thickness: 5mm thick
  • Weight: 0.131Kgs
  • Finish: Hot Dipped Galvanised to BS EN ISO 1461:1009

Channel Beam Clamps from Network Cable & Pipe Supports are designed and manufactured to the highest quality standards (ISO 9001:2015).

Prod Code: BC78/P1272

Next Day Delivery – UK Mainland.

Galvanised coatings prevent oxidation of the protected metal to create a longer-lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Galvanising is a plating that (in contrast to iron oxide) does not trigger a breakdown of the substrates’ surface integrity as it is formed. The galvanising, if left intact, can act as a barrier to further oxidation.

*Cone point set screws are types of screws, often called grub screws, that have a sharp, pointed tip on one end, which allows them to penetrate into flat surfaces, such as wood. The other end is usually a closed tip. They’re used to secure an object within or to another object.

Additional Information

Weight 0.131 kg
Dimensions 5 x 3 x .5 cm